The restomod 1968 1800S back with us after trimwork and custom bumper fit by the bodyshop. Next stage to get the brakes connected and ready for first engine start up. Aiming for Christmas
The 1963 P1800S at the bodyshop for final shaping and paintwork, due back to us in February next year
The gold 1800E having lower bodyworks and paint refresh, I have decided to keep this one for a while :)
Just in from Finland an early right hand drive Jensen P1800 for recommissioning after a long spell in a museum.
Missing its Jensen wheel trims but has the rare chrome screen and roof gutter trims in place
The 1963 P1800S on its way to the bodyshop for panel gapping before its new coat of paint. Bought as unfinished project out of France and paint finish not up to scratch.
A 1966 1800S recently brought over from Ireland in for a checkover and other works
New shocks and brake servo fitted
A 1968 green with tan S in for window alignment and other works
Phase 2 of the 1967 1800S fit up, this stunning car really is going to be a show stopper, off to the trimmer next
The left hand drive 1800E back from the bodyshop after final polishing
Now for fit up :)
Back lights and badges first
Screens back in next week
Nearly ready for the owner to pick up after the body rebuild.
1971 1800E being prepared for lower bodywork and new seats
Bumpers off the gold 1800E and then off for bodywork
Great panel gaps on this unmolested 77000 mile car
Lovely 1969 2 litre 1800S in for power steering and other jobs, love the green with tan S!
The LHD 1971 1800E being flatted and polished, back in for fit up next week
On the final paintwork phase
Due back for fit up in two weeks time
1967 1800S back from the paintshop, retrim in tan next job
New tan interior going in to the blue 1967 1800S
Looking good, just the overmats to go, leather and carpets from Richard Felton at Specialist Upholstery :)
Grey carpets and tan leather go really well
1968 1800S in for a service
1962 P1800 in final bodywork stages.
It's not been easy with this one as a lot of Jensen anomolies with the panels.
1971 1800E early bodywork stages.
Early bodywork stages.
Phase 1 of 1967 1800S in for assembly with all new or refurbished components.
Suspension and drivetrain going in first
Underside finish is perfect
Back axle going in
Brake pipes, servo and master cylinders going in
Engine put onto crossmember and body dropped onto the assembly
Looking good :)
On slave wheels to check ride height.
1967 1800S being readied for sale with works to brakes, interior trim, new rear tyres, hubcaps and wheeltrims, carb tuning plus oil and filter change. Extended road tests next week :)
Car now sold and to have power steering and a new tan interior fitted.
Back on to the 1963 P1800S, clutch and braking system bled up, loan seat fitted and a short test drive on the farm...